synth builder: SOLD B stock Dalek Modulator

http://www.monorocket.com/blog/b-stock-sales/

SOLD Dalek Modulator

Balanced Ring Modulator/Multiplier
Process external signals or use onboard linear VCO’s
2 Waveforms per VCO (SQ and SIN)
OBEY/DESTROY and AC/DC shape modulator output
CV inputs control VCO pitch
CV controls adjust (pre ring) cross modulation when no CV input is present

$200 + shipping
($15 flat rate USA/Exact postage for Non US)

contact me for future availability of all cases and livewire synthesizer modules: r@monorocket.com

Amp Camp – Recap and Review

(note to self; “next time I do this – write the draft as I go)

To fulfill an ambition to become more self reliant with the maintenance of my rig, I began educating myself on the mechanics of my backline.  Since 1991 that’s been a post CBS Fender Twin with some minor modifications. If you follow this blog, you’ll know I was able to acquire a second, identical model (with slightly more modification).

A couple of months ago I got an email blast from Gerald Weber (Kendrick Amps) about a couple of Amp Camps. The first being “build your own amp” and the second “work on your own amp”. I’ve been playing with a lot of low voltage, solid state gear for the last 10 years. I figured that using “work on your own amp” camp would be the best way to transition to higher voltage gear, complete with a lowered risk of electrocuting myself.

After a couple of arranged payments, I secured a spot for the camp and started pulling chassis in preparation for the trip.

Day -1: (arrived the night before)

Amp Camp is hosted at the Kendrick Amp facility near Killeen/Ft Hood (TX, natch).
My enthusiasm for the event was multiplied by anticipation of getting my first Whataburger since leaving El Paso in the summer of 88. 

Day 1:

I was so busy with filling my own orders (Monorocket) that I missed receiving the itinerary email, so I had no idea what the schedule was. I decided that 0800 would be a good guess so I started my day the TX way and headed to Kempner (one town over):

 0800 turned out to be two hours early and I was the only attendee at the ranch. Fortunately, one of the Kendrick staff was already there and had everything open. This gave me time to set up, settle in, drink shop coffee and hang out with Geralds dogs (both named Max).

 

One of the first “other attendees” to show up was someone who attended the previous weeks amp camp. In addition to building the kit, he wanted to work on his gear just like I did. He showed up early to get a jump start on repairs using everything he’d learned so far

Once all the other attendees arrived, things took a more positive turn. Everybody was really cool and friendly. Gatherings like this tend to go either way: either everyone’s really cool and ready to revel in shared interests or each person stakes their own territory and works in isolation. 7 attendees x 2-3 amps each = a good stack of cool gear. There were Bandmasters, Super Reverbs, Bassman heads and even some Ampegs (a Gemini and Flip top bass amp) and a handwired, scratch built JTM45 clone (which was way more immaculate than anything I’ve ever seen Marshall do).

By the time everyone started calling each other by first names, a door opened behind me and in walks Gerald Weber. Without missing a beat after introductions, he launched into a ice breaker joke and started the instruction (I’m not sharing the content – that’s what the tuition pays for)

The only thing I will share is that all of us were guaranteed that everything we were about to do was really easy.

The format was mostly informal and hands on. After dropping some rudiments, we were all sent to our stations to fire up soldering irons and start fixing.

I’ll confess that I did a lot of prep before coming down (helps reduce information overload). I’d even watched a handful of youtube vids that Gerald did. Replacing filter caps and coupling caps before anything else is apparently SOP.

I’ve had my primary amp “overhauled” twice since 1991 and was really disappointed to find out that neither serviceperson replaced any of the filter caps (or most of the coupling caps).

before:

after: 
 

After doing the cap job in both of my amps, the rest of the first day was spent on my primary amp (Norco). The only thing I didn’t do was fire it up for a functional test.

Day 2

I showed up early again knowing that I could get a head start on amp 2 (Flames).

Better than the hands on training. were the decades of product knowledge between Gerald and Johnny. This was worth the fee alone. These guys have probably seen and forgot more stuff than I’ll ever know. As mentioned earlier the other attendees brought a a wide spectrum of old gear and they had anecdotes and history for each piece.

A video posted by R (@rtopia) on

(Flames Twin recap complete)

 

(stack of discarded parts)

(Norco Twin Biased)

The best part overall was firing up my amps first the first time after doing all the rework.
Prior to coming down the Norco Twin was operating intermittent and the Flames Twin was humming.Both amps were running clean and quiet.

Before I left I’d consulted with Johnny about some mods to the tone stack. I was ready to drill a hole in the back panel for a switch, but he was more than happy to walk me through the mod using the existing BRIGHT switch. Naturally, anyone with this much backstory on the amps knows that the BRIGHT switch is usually on anyway, so why not make that setting permanent and use the switch for something else. I executed that mod before loading the chassis back in their cabinets (after I got home).

Bottom line: I want to do this again. The chalkboard time was primer enough for me to make the jump from PCBs to handwired/IC to tubes. Now I’m prowling the flea markets and yard sales looking for vintage pieces that need repair, to give me an excuse for going through this again.

amp camp – preflight 1

got an email blast from Gerald Weber about a two day workshop, dedicated to working on my own amps….
…so I signed up and the adventure begins

I’m taking 3 amps with me:

“bad eugene” (made from a Magnavox phono amp)
-needs new filter cap

“flames twin”

– restoring master volume
-“mapping” the previously installed mods
– power tube upgrade/bias (going half power)

 “norco twin” (my number one since 1991)

– hunt for source and fix recent dead bug event
– power tube upgrade/bias (going half power)
– tweaks for more gain and post inverter breakup

stay tuned for future updates